-- sysObjectId definitions. These values are returned in the
-- .iso.org.dod.internet.mgmt.mib-2.system.sysObjectID.0 variable
hp386 OBJECT IDENTIFIER ::= { system 8 }
hp9000s300 OBJECT IDENTIFIER ::= { hpux 2 }
hp9000s800 OBJECT IDENTIFIER ::= { hpux 3 }
hp9000s700 OBJECT IDENTIFIER ::= { hpux 5 }
hpOpenView OBJECT IDENTIFIER ::= { openView 1 }
sun4 OBJECT IDENTIFIER ::= { sparc 1 }
sun5 OBJECT IDENTIFIER ::= { sparc 2 }
-- the ComputerSystem Group
computerSystemUpTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Time since the last boot."
::= { computerSystem 1 }
computerSystemUsers OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of users logged on to system."
::= { computerSystem 2 }
computerSystemAvgJobs1 OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Average number of jobs in the last 1
minute * 100."
::= { computerSystem 3 }
computerSystemAvgJobs5 OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Average number of jobs in the last 5
minutes * 100."
::= { computerSystem 4 }
computerSystemAvgJobs15 OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Average number of jobs in the last 15
minutes * 100."
::= { computerSystem 5 }
computerSystemMaxProc OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Maximum number of processes allowed in system.
Implemented with Extensible SNMP Agent."
::= { computerSystem 6 }
computerSystemFreeMemory OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Free memory. SunOS - not implemented.
Implemented with Extensible SNMP Agent."
::= { computerSystem 7 }
computerSystemPhysMemory OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Physical memory. SunOS - not implemented.
Implemented with Extensible SNMP Agent."
::= { computerSystem 8 }
computerSystemMaxUserMem OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Maximum user memory. SunOS - not implemented.
Implemented with Extensible SNMP Agent."
::= { computerSystem 9 }
computerSystemSwapConfig OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Swap space configured. SunOS - not implemented.
Implemented with Extensible SNMP Agent."
::= { computerSystem 10 }
computerSystemEnabledSwap OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Enabled via swapon. SunOS - not implemented.
Implemented with Extensible SNMP Agent."
::= { computerSystem 11 }
computerSystemFreeSwap OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Currently free swap space. SunOS - not implemented.
Implemented with Extensible SNMP Agent."
::= { computerSystem 12 }
computerSystemUserCPU OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"CPU used by users. SunOS - not implemented.
Implemented with Extensible SNMP Agent."
::= { computerSystem 13 }
computerSystemSysCPU OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"CPU used by system. SunOS - not implemented.
Implemented with Extensible SNMP Agent."
::= { computerSystem 14 }
computerSystemIdleCPU OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"CPU idle. SunOS - not implemented.
Implemented with Extensible SNMP Agent."
::= { computerSystem 15 }
computerSystemNiceCPU OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"CPU nice. SunOS - not implemented.
Implemented with Extensible SNMP Agent."
::= { computerSystem 16 }
-- The FileSystem Group
fileSystemMounted OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of file systems mounted."
::= { fileSystem 1 }
-- The FileSystem Table
fileSystemTable OBJECT-TYPE
SYNTAX SEQUENCE OF FileSystemEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"File system table."
::= { fileSystem 2 }
fileSystemEntry OBJECT-TYPE
SYNTAX FileSystemEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Each entry contains objects for a particular file
system."
INDEX { fileSystemID1, fileSystemID2 }
::= { fileSystemTable 1 }
FileSystemEntry ::= SEQUENCE {
fileSystemID1
INTEGER,
fileSystemID2
INTEGER,
fileSystemName
DisplayString,
fileSystemBlock
INTEGER,
fileSystemBfree
INTEGER,
fileSystemBavail
INTEGER,
fileSystemBsize
INTEGER,
fileSystemFiles
INTEGER,
fileSystemFfree
INTEGER,
fileSystemDir
DisplayString
}
fileSystemID1 OBJECT-TYPE
SYNTAX INTEGER (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"First file system ID."
::= { fileSystemEntry 1 }
fileSystemID2 OBJECT-TYPE
SYNTAX INTEGER (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Second file system ID."
::= { fileSystemEntry 2 }
fileSystemName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Name of mounted file system."
::= { fileSystemEntry 3 }
fileSystemBlock OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total blocks in file system."
::= { fileSystemEntry 4 }
fileSystemBfree OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Free blocks in file system."
::= { fileSystemEntry 5 }
fileSystemBavail OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Free blocks avail to non-superuser."
::= { fileSystemEntry 6 }
fileSystemBsize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Fundamental file system block size."
::= { fileSystemEntry 7 }
fileSystemFiles OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total file nodes in file system."
::= { fileSystemEntry 8 }
fileSystemFfree OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Free file nodes in file system."
::= { fileSystemEntry 9 }
fileSystemDir OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"File system path prefix."
::= { fileSystemEntry 10 }
-- The Processes Group
processNum OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of processes running."
::= { processes 1 }
-- The processes table
processTable OBJECT-TYPE
SYNTAX SEQUENCE OF ProcessEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Processes Table.
Implemented with Extensible SNMP Agent."
::= { processes 2 }
processEntry OBJECT-TYPE
SYNTAX ProcessEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Each entry contains information about a process
running on the system."
INDEX { processPID }
::= { processTable 1 }
ProcessEntry ::= SEQUENCE {
processPID
INTEGER,
processIdx
INTEGER,
processUID
INTEGER,
processPPID
INTEGER,
processDsize
Gauge,
processTsize
Gauge,
processSsize
Gauge,
processNice
Gauge,
processMajor
INTEGER,
processMinor
INTEGER,
processPgrp
INTEGER,
processPrio
INTEGER,
processAddr
INTEGER,
processCPU
Gauge,
processUtime
TimeTicks,
processStime
TimeTicks,
processStart
TimeTicks,
processFlags
INTEGER,
processStatus
INTEGER,
processWchan
INTEGER,
processProcNum
INTEGER,
processCmd
DisplayString,
processTime
INTEGER,
processCPUticks
Counter,
processCPUticksTotal
Counter,
processFss
INTEGER,
processPctCPU
Gauge,
processRssize
Gauge,
processSUID
INTEGER,
processUname
DisplayString,
processTTY
DisplayString
}
processPID OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The process ID (pid)."
::= { processEntry 1 }
processIdx OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index for pstat() requests. SunOS - not implemented."
::= { processEntry 2 }
processUID OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Process User ID."
::= { processEntry 3 }
processPPID OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Parent process ID."
::= { processEntry 4 }
processDsize OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Process data size."
::= { processEntry 5 }
processTsize OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Process text size."
::= { processEntry 6 }
processSsize OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Process stack size."
::= { processEntry 7 }
processNice OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Process nice value."
::= { processEntry 8 }
processMajor OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Process tty major number. SunOS - not implemented."
::= { processEntry 9 }
processMinor OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Process tty minor number. SunOS - not implemented."
::= { processEntry 10 }
processPgrp OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Process group of this process."
::= { processEntry 11 }
processPrio OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Process priority."
::= { processEntry 12 }
processAddr OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Address of process (in memory)."
::= { processEntry 13 }
processCPU OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Processor utilization for scheduling."
::= { processEntry 14 }
processUtime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"User time spent executing."
::= { processEntry 15 }
processStime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"System time spent executing."
::= { processEntry 16 }
processStart OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Time Process started."
::= { processEntry 17 }
processFlags OBJECT-TYPE
SYNTAX INTEGER {
incore(1),
sys(2),
locked(4),
trace(8),
trace2(16)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Flags associated with process. SunOS - values found in
/usr/include/sys/proc.h."
::= { processEntry 18 }
processStatus OBJECT-TYPE
SYNTAX INTEGER {
sleep(1),
run(2),
stop(3),
zombie(4),
other(5),
idle(6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The process status. SunOS - sleep(1), wait(2), run(3),
idle (4), zombie(5), stop(6)"
::= { processEntry 19 }
processWchan OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"If processStatus is sleep, value sleeping on."
::= { processEntry 20 }
processProcNum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Processor this process last run on. SunOS - not
implemented."
::= { processEntry 21 }
processCmd OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Command the process is running."
::= { processEntry 22 }
processTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Resident time for scheduling."
::= { processEntry 23 }
processCPUticks OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Ticks of cpu time."
::= { processEntry 24 }
processCPUticksTotal OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total ticks for life of process. SunOS - not
implemented."
::= { processEntry 25 }
processFss OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Fair Share Schedular Group. SunOS - not implemented."
::= { processEntry 26 }
processPctCPU OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Percent CPU * 100 for this process."
::= { processEntry 27 }
processRssize OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Resident Set Size for process (private pages)."
::= { processEntry 28 }
processSUID OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"saved UID."
::= { processEntry 29 }
processUname OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"User name."
::= { processEntry 30 }
processTTY OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Process TTY. SunOS - not implemented."
::= { processEntry 31 }
-- The Ieee8023Mac Group
-- This group is not implemented on Solaris.
-- The Ieee8023Mac Table
ieee8023MacTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ieee8023MacEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of IEEE 802.3 Interface entries."
::= { ieee8023Mac 1 }
ieee8023MacEntry OBJECT-TYPE
SYNTAX Ieee8023MacEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Each entry contains statistics for ieee 802.3
interfaces."
INDEX { ieee8023MacIndex }
::= { ieee8023MacTable 1 }
Ieee8023MacEntry ::= SEQUENCE {
ieee8023MacIndex
INTEGER,
ieee8023MacTransmitted
Counter,
ieee8023MacNotTransmitted
Counter,
ieee8023MacDeferred
Counter,
ieee8023MacCollisions
Counter,
ieee8023MacSingleCollisions
Counter,
ieee8023MacMultipleCollisions
Counter,
ieee8023MacExcessCollisions
Counter,
ieee8023MacLateCollisions
Counter,
ieee8023MacCarrierLostErrors
Counter,
ieee8023MacNoHeartBeatErrors
Counter,
ieee8023MacFramesReceived
Counter,
ieee8023MacUndeliverableFramesReceived
Counter,
ieee8023MacCRCErrors
Counter,
ieee8023MacAlignmentErrors
Counter,
ieee8023MacResourceErrors
Counter,
ieee8023MacControlFieldErrors
Counter,
ieee8023MacUnknownProtocolErrors
Counter,
ieee8023MacMulticastsAccepted
Counter
}
ieee8023MacIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index value that uniquely identifies the
interface to which this entry is applicable. The
interface identified by a particular value of this
index is the same interface as identified by the
same value of ifIndex."
::= { ieee8023MacEntry 1 }
ieee8023MacTransmitted OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of frames successfully transmitted."
::= { ieee8023MacEntry 2 }
ieee8023MacNotTransmitted OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of frames not transmitted."
::= { ieee8023MacEntry 3 }
ieee8023MacDeferred OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of frames deferred because the medium
was busy."
::= { ieee8023MacEntry 4 }
ieee8023MacCollisions OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total number of transmit attempts that were
retransmitted due to collisions. SunOS with Intel 82586
Ethernet driver - total number of collisions."
::= { ieee8023MacEntry 5 }
ieee8023MacSingleCollisions OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of transmit attempts that are involved in a
single collision and are subsequently transmitted
successfully. SunOS - this is always 0."
::= { ieee8023MacEntry 6 }
ieee8023MacMultipleCollisions OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of transmit attempts that are involved in
between 2 and 15 collision attempts and are
subsequently transmitted successfully. SunOS with Intel
82586 is always 0. SunOS with AMD 7990 LANCE driver -
number of transmit attempts that are involved in between
1 and 15 collision attempts and are subsequently
transmitted successfully."
::= { ieee8023MacEntry 7 }
ieee8023MacExcessCollisions OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of transmit attempts that are involved in
more than 15 collision attempts and are subsequently
transmitted successfully. SunOS with Intel 82586
Ethernet driver - this is always 0."
::= { ieee8023MacEntry 8 }
ieee8023MacLateCollisions OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of transmit attempts aborted because a
collision occurred after the allotted channel time
had elapsed."
::= { ieee8023MacEntry 9 }
ieee8023MacCarrierLostErrors OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of times that carrier sense was lost when
attempting to transmit."
::= { ieee8023MacEntry 10 }
ieee8023MacNoHeartBeatErrors OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of times no heart beat was indicated after a
transmission."
::= { ieee8023MacEntry 11 }
ieee8023MacFramesReceived OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of frames successfully received."
::= { ieee8023MacEntry 12 }
ieee8023MacUndeliverableFramesReceived OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of frames received that were not delivered
because the software buffer was overrun when frames
were sent faster than they could be received."
::= { ieee8023MacEntry 13 }
ieee8023MacCRCErrors OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of Cyclical Redundancy Check (CRC) errors
detected."
::= { ieee8023MacEntry 14 }
ieee8023MacAlignmentErrors OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of frames received that were both misaligned
and had bad CRC."
::= { ieee8023MacEntry 15 }
ieee8023MacResourceErrors OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of frames received that were lost due to lack
of resources."
::= { ieee8023MacEntry 16 }
ieee8023MacControlFieldErrors OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of frames received with errors in the control
field. SunOS - this is always 0."
::= { ieee8023MacEntry 17 }
ieee8023MacUnknownProtocolErrors OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of frames dropped because the type field
or sap field referenced an invalid protocol. SunOS -
this is always 0."
::= { ieee8023MacEntry 18 }
ieee8023MacMulticastsAccepted OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of accepted muliticast addresses."
::= { ieee8023MacEntry 19 }
-- The Icmp Group
icmpEchoReq OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of milliseconds it takes for an ICMP
echo request to respond. IcmpEchoReq is
-1 if there is an internal error,
-2 if the echo request timed out,
-3 if the echo reply is not the correct reply,
-4 if the packet size is too large, and
-5 if the timeout is invalid.
To request the ICMP response time for IP address
a1.a2.a3.a4 with a timeout of t and a packet size of s,
send a request for icmpEchoReq.s.t.a1.a2.a3.a4.
For example, suppose one wanted to find out the number
of milliseconds it took to ping 15.2.112.113, with time
out of 8 seconds, and packet size of 75. Accordingly,
icmpEchoReq.75.8.15.2.112.113 would identify the number
of milliseconds.
This MIB object is there only to provide for backward
compatibility. A new MIB object is provided which does not
violate the SNMP standards too,
'icmp.icmpEchoReqTable.icmpEchoReqEntry.icmpEchoReqTime'.
This new MIB object is recommended to be used to achieve the
same funtionality as provided by this (icmp.icmpEchoReq)
MIB object."
::= { icmp 1 }
icmpEchoReqTable OBJECT-TYPE
SYNTAX SEQUENCE OF IcmpEchoReqEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A conceptual table holding the ICMP response times for
various remote hosts. The table is a conceptual one in the
sense that, the table actually contains no data. When a query
for the table object icmpEchoReqTime is received by the agent
an ICMP echo request is sent to the remote host, the ICMP
echo reply is received, the elapsed time is calculated and
is sent back as the response. Note that except the columnar
object icmpEchoReqTime other objects in the table, viz.,
icmpEchoReqPktSize, icmpEchoReqTimeout and icmpEchoReqHost,
have ACCESS previlege as not-accessible, those variables
cannot be queried for.
The table entries have the objects icmpEchoReqPktSize,
icmpEchoReqTimeout and icmpEchoReqHost as the indices, which
is effectively a way of transfering these required details
to the agent, so that the agent could do its function and
respond appropriately."
::= { icmp 2 }
icmpEchoReqEntry OBJECT-TYPE
SYNTAX IcmpEchoReqEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Each entry in the table icmpEchoReqTable is a conceptual one.
See description of icmpEchoReqTable for more details."
INDEX { icmpEchoReqPktSize, icmpEchoReqTimeOut, icmpEchoReqHost }
::= { icmpEchoReqTable 1 }
IcmpEchoReqEntry ::=
SEQUENCE {
icmpEchoReqTime
INTEGER,
icmpEchoReqPktSize
INTEGER,
icmpEchoReqTimeOut
INTEGER,
icmpEchoReqHost
IpAddress
}
icmpEchoReqTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The elapsed time between the time the ICMP echo request is
sent to the host identified by the index object icmpEchoReqHost
and the time the ICMP echo reply is received at the agent host.
The ICMP packet size and the time out to be used for the
ICMP echo request are identified by the indices
icmpEchoReqPktSize and icmpEchoReqTimeOut. See description
of icmpEchoReqTable for more details.
In other words, the number of milliseconds it takes for
an ICMP echo request to respond. Other return values:
-1 if there is an internal error,
-2 if the echo request timed out,
-3 if the echo reply is not the correct reply,
-4 if the packet size is too large, and
-5 if the timeout is invalid.
To request the ICMP response time for IP address
a1.a2.a3.a4 with a timeout of t and a packet size of s,
send a request for icmpEchoReqTime.s.t.a1.a2.a3.a4.
For example, suppose one wanted to find out the number
of milliseconds it took to ping 15.2.112.113, with time
out of 8 seconds, and packet size of 75. Accordingly,
icmpEchoReqTime.75.8.15.2.112.113 would identify the
number of milliseconds."
::= { icmpEchoReqEntry 1 }
icmpEchoReqPktSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The packet size to be used for the ICMP echo request, see
description of icmpEchoReqTable for more details.
The object serves as the first index out of three indices
used when the object icmpEchoReqTime is queried. Note that
this object's value cannot be queried for, this object serves
as an input to the agent itself and a query for this object
makes no sense."
::= { icmpEchoReqEntry 2 }
icmpEchoReqTimeOut OBJECT-TYPE
SYNTAX INTEGER
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The time period in seconds to wait for an ICMP echo reply
message after an ICMP echo request is sent to the identified
host, see description of icmpEchoReqTable for more details.
The object serves as the second index out of three indices
used when the object icmpEchoReqTime is queried. Note that
this object's value cannot be queried for, this object serves
as an input to the agent itself and a query for this object
makes no sense."
::= { icmpEchoReqEntry 3 }
icmpEchoReqHost OBJECT-TYPE
SYNTAX IpAddress
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The host to which the ICMP echo request is to be sent,
the ping time between the host identified by this index
object and the agent's host is what is queried for, see
description of icmpEchoReqTable for more details.
The object serves as the last index out of three indices
used when the object icmpEchoReqTime is queried. Note that
this object's value cannot be queried for, this object serves
as an input to the agent itself and a query for this object
makes no sense."
::= { icmpEchoReqEntry 4 }
-- The Trap Group
trapDestinationNum OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of trap destinations."
::= { trap 1 }
-- The Trap Destination Table
trapDestinationTable OBJECT-TYPE
SYNTAX SEQUENCE OF TrapDestinationEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"List of addresses to which the agent sends traps."
::= { trap 2 }
trapDestinationEntry OBJECT-TYPE
SYNTAX TrapDestinationEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Each entry contains the address of a management
station."
INDEX { trapDestination }
::= { trapDestinationTable 1 }
TrapDestinationEntry ::= SEQUENCE {
trapDestination
IpAddress
}
trapDestination OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Address to which the agent sends traps."
::= { trapDestinationEntry 1 }
-- The SnmpdConf Group
snmpdConfRespond OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The SNMP agent was configured to respond to all
objects if snmpdConfRespond is true. HP-Internal
use only."
::= { snmpdConf 1 }
snmpdReConfigure OBJECT-TYPE
SYNTAX INTEGER {
reset(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The agent will re-configure itself if
snmpdReConfigure is set to reset(1)"
::= { snmpdConf 2 }
snmpdFlag OBJECT-TYPE
SYNTAX INTEGER {
removetrap(1),
netwareproxy(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the capability of the agent."
::= { snmpdConf 3 }
snmpdLogMask OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The agent's log mask."
::= { snmpdConf 4 }
snmpdVersion OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The agent's version number."
::= { snmpdConf 5 }
snmpdStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates the status of the agent. Setting
the agent to down will kill it."
::= { snmpdConf 6 }
snmpdSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The amount of memory the agent has allocated."
::= { snmpdConf 7 }
snmpdWhatString OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The what string of the agent."
::= { snmpdConf 9 }
-- The Cluster Group
--
-- This group is not implemented on SunOS/Solaris.
isClustered OBJECT-TYPE
SYNTAX INTEGER {
standalone(1),
rootserver(2),
cnode(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Describes whether machine is clustered or not."
::= { cluster 1 }
clusterTable OBJECT-TYPE
SYNTAX SEQUENCE OF ClusterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"List of nodes on the cluster."
::= { cluster 2 }
clusterEntry OBJECT-TYPE
SYNTAX ClusterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Each entry contains information about the clustered
node."
INDEX {clusterID }
::= { clusterTable 1 }
ClusterEntry ::= SEQUENCE {
clusterID
INTEGER,
clusterMachineID
OCTET STRING,
clusterType
DisplayString,
clusterCnodeName
DisplayString,
clusterSwapServingCnode
INTEGER,
clusterKcsp
INTEGER,
clusterCnodeAddress
IpAddress
}
clusterID OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The cnode id."
::= { clusterEntry 1 }
clusterMachineID OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The cnode machine id."
::= { clusterEntry 2 }
clusterType OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The cnode type (r or c)."
::= { clusterEntry 3 }
clusterCnodeName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The cnode name."
::= { clusterEntry 4 }
clusterSwapServingCnode OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The swap serving cnode."
::= { clusterEntry 5 }
clusterKcsp OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"KCSP."
::= { clusterEntry 6 }
clusterCnodeAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The cnode IP Address."
::= { clusterEntry 7 }
clusterCnodeID OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The machine's cnodes id"
::= { cluster 3 }
-- The AuthFail Group
authFailTable OBJECT-TYPE
SYNTAX SEQUENCE OF AuthFailEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"List of managers that caused an authentication failure.
This list has a maximum size."
::= { authfail 1 }
authFailEntry OBJECT-TYPE
SYNTAX AuthFailEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Each entry contains the ip address of the management
station."
INDEX { authIpAddress }
::= { authFailTable 1 }
AuthFailEntry ::= SEQUENCE {
authIpAddress
NetworkAddress,
authTime
TimeTicks,
authCommunityName
OCTET STRING
}
authIpAddress OBJECT-TYPE
SYNTAX NetworkAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The ip address of the management station that sent a
request to the agent with an incorrect community name."
::= { authFailEntry 1 }
authTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The time since the agent received the un-authenticated
request."
::= { authFailEntry 2 }
authCommunityName OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The community name used in the request"
::= { authFailEntry 3 }
-- the OpenView trap variables Group
-- These object ID's cannot be retrieved from the SNMP Agent, but
-- instead document the objects sent with OpenView SNMP traps
openViewSourceId OBJECT-TYPE
SYNTAX INTEGER
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The identifier of the software generating the trap/event.
This number is used by HP OpenView software when it sends
an event to the OpenView event system. It identifies
which software component sent the event.
This object cannot be retrieved from the SNMP agent."
::= { openViewTrapVars 1 }
openViewSourceName OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The source of the event (may not be the machine upon
which the event was generated). This string is used
by HP OpenView software when it sends an event. It
identifies for which source (node) the event is generated.
This object cannot be retrieved from the SNMP agent."
::= { openViewTrapVars 2 }
openViewObjectId OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The OpenView object identifier associated with the
source of the trap/event.
This object cannot be retrieved from the SNMP agent."
::= { openViewTrapVars 3 }
openViewData OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Any miscellaneous data sent with an OpenView trap/event.
This object cannot be retrieved from the SNMP agent."
::= { openViewTrapVars 4 }
openViewSeverity OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The OpenView event severity associated with the trap/event.
This object cannot be retrieved from the SNMP agent."
::= { openViewTrapVars 5 }
openViewCategory OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The OpenView event category associated with the trap/event.
This object cannot be retrieved from the SNMP agent."
::= { openViewTrapVars 6 }
openViewFilter OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The event filter for an application connecting to the
OpenView event system.
This object cannot be retrieved from the SNMP agent."
::= { openViewTrapVars 7 }
openViewEntity OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The entity (string name) of an application connecting
to the OpenView event system.
This object cannot be retrieved from the SNMP agent."
::= { openViewTrapVars 8 }
openViewAddress OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The IP address of the node from where an application
is connecting to the OpenView event system.
This object cannot be retrieved from the SNMP agent."
::= { openViewTrapVars 9 }
openViewPid OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The process ID of an application connecting to the
OpenView event system.
This object cannot be retrieved from the SNMP agent."
::= { openViewTrapVars 10 }
END
